Unit 1: The Power Of Reproductionmr. Mac's Page

 admin



  • Contents XP-610 User's Guide.
  • The method for resetting a Mac's SMC depends on the type of Mac you have. All SMC reset instructions require shutting down your Mac first. If your Mac fails to shut down, press and hold the power button until the Mac shuts down, which usually takes 10 seconds or so.
  1. Unit 1: The Power Of Reproductionmr. Mac's Page Number
  2. Unit 1: The Power Of Reproductionmr. Mac's Page Book
  3. Unit 1: The Power Of Reproductionmr. Mac's Pageant

Power adapters for Mac notebooks are available in 29W, 30W, 45W, 60W, 61W, 85W, 87W and 96W varieties. You should use the appropriate wattage power adapter for your Mac notebook. You can use a compatible higher wattage power adapter without issue, but it won't make your computer charge faster or operate differently. If you use a power adapter that is lower in wattage than the adapter that came with your Mac, it won't provide enough power to your computer.

. You cannot use the flatbed scanner dock and the Network Interface Unit at the same time. Parent topic: Scanner Parts Locations Changing the Power Off and Sleep Timer Settings You can use the Epson Scan 2 Utility to change the time period before the scanner enters sleep mode and turns off automatically. 1 of 20 'JUST THE MATHS' by A.J. Hobson TEACHING UNITS - TABLE OF CONTENTS (Average number of pages = 1038 ¸140 = 7.4 per unit) All units are in presented as.PDF files. Ordering Information MAC Viper™ Wash DX in cardboard box: P/N 90233070 MAC Viper™ Wash DX in 2-unit flightcase: P/N 90233080 Shipping Information In cardboard carton: Shipping dimensions (LxWxH): 580 x 450 x 870 mm (22.9 x 17.8 x 34.3 in.).

Mac notebooks that charge via USB-C come with an Apple USB-C Power Adapter with detachable AC plug (or 'duckhead') and a USB-C Charge Cable.

Mac notebooks that charge via MagSafe come with an AC adapter with MagSafe connector and detachable AC plug, and an AC cable.

The images below show the style of adapter that comes with each MacBook, MacBook Pro and MacBook Air. If you're not sure which model Mac you have, use these articles:

USB-C

Apple 29W or 30W USB-C Power Adapter and USB-C Charge Cable

  • MacBook models introduced in 2015 or later

Apple 30W USB-C Power Adapter and USB-C Charge Cable

  • MacBook Air models introduced in 2018 or later

Apple 61W USB-C Power Adapter and USB-C Charge Cable

  • 13-inch MacBook Pro models introduced in 2016 or later

Apple 87W USB-C Power Adapter and USB-C Charge Cable

  • 15-inch MacBook Pro models introduced in 2016 or later

Apple 96W USB-C Power Adapter and USB-C Charge Cable

Power
  • 16-inch MacBook Pro models introduced in 2019

Make sure you're using the correct USB-C charge cable

For the best charging experience, you should use the USB-C charge cable that comes with your Mac notebook. If you use a higher wattage USB-C cable, your Mac will still charge normally. USB-C cables rated for 29W or 30W will work with any USB-C power adapter, but won't provide enough power when connected to a power adapter that is more than 61W, such as the 96W USB-C Power Adapter.

You can verify that you're using the correct version of the Apple USB-C Charge Cable with your Mac notebook and its USB-C AC Adapter. The cable's serial number is printed on its external housing, next to the words 'Designed by Apple in California. Assembled in China.'

  • If the first three characters of the serial number are C4M or FL4, the cable is for use with an Apple USB-C Power Adapter up to 61W.
  • If the first three characters of the serial number are DLC, CTC, FTL or G0J, the cable is for use with an Apple USB-C Power Adapter up to 100W.
  • If the cable says 'Designed by Apple in California. Assembled in China' but has no serial number, you might be eligible for a replacement USB-C charge cable.

MagSafe 2

85W MagSafe power adapter with MagSafe 2 style connector

  • 15-inch MacBook Pro models introduced in 2012 through 2015

60W MagSafe power adapter with MagSafe 2 style connector

  • 13-inch MacBook Pro models introduced in 2012 through 2015

45W MagSafe power adapter with MagSafe 2 style connector

  • MacBook Air models introduced between 2012 and 2017

About the MagSafe to MagSafe 2 Converter

If you have an older MagSafe adapter, you can use it with newer Mac computers that have MagSafe 2 ports using a MagSafe to MagSafe 2 Converter (shown).

Unit 1: The Power Of Reproductionmr. Mac

MagSafe 'L' and 'T' shaped adapters

60W MagSafe power adapter with 'T' style connector

  • 13-inch MacBook Pro models introduced in 2009
  • MacBook models introduced between 2006 and mid 2009

60W MagSafe power adapter with 'L' style connector

  • 13-inch MacBook Pro models introduced between 2010 and 2012
  • MacBook models introduced between late 2009 and 2010

85W MagSafe power adapter with 'T' style connector

  • 15-inch MacBook Pro models introduced between 2006 and 2009
  • 17-inch MacBook Pro models introduced between 2006 and 2009

85W MagSafe power adapter with 'L' style connector

  • 15-inch MacBook Pro models introduced between 2010 and 2012
  • 17-inch MacBook Pro models introduced between 2010 and 2011

45W MagSafe power adapter with 'L' style connector

  • 13-inch MacBook Air models introduced between 2008 and 2011*
  • 11-inch MacBook Air models introduced between 2010 and 2011

* Adapters that shipped with the MacBook Air (Original), MacBook Air (Late 2008) and MacBook Air (Mid 2009) are not recommended for use with MacBook Air (Late 2010) models. When possible, use your computer's original adapter or a newer adapter.

Learn more

You can get extra or replacement adapters with AC cable and plug at the Apple Online Store, an Apple Reseller, or an Apple Store.

A replacement adapter might not be the same size, colour, shape or wattage as the original adapter that came with your computer. But it should power and charge your Mac like the adapter that originally came with your computer.

If you need help using your MagSafe adapter, see Apple Portables: Troubleshooting power adapters.

If you're looking for a PowerPC-based power adapter, see PowerPC-based Apple Portables: Identifying the right power adapter and power cable.

Download

Development Team

  • Windows*: Joe Olivas, Timo Kleimola, Mark Price, Timothy McKay
  • MacOS*: Patrick Konsor

Previous Contributors

  • Windows*: Seung-Woo Kim, Karthik Krishnan, Vardhan Dugar, Joseph Jin-Sung Lee, Jun De Vega

Introduction

Intel® Power Gadget is a software-based power usage monitoring tool enabled for Intel® Core™ processors (from 2nd Generation up to 10th Generation Intel® Core™ processors). Intel® Atom™ processors are not supported. It is supported on Windows* and macOS* and includes an application, driver, and libraries to monitor and estimate real-time processor package power information in watts using the energy counters in the processor. With this release, we are providing functionality to evaluate power information on various platforms including notebooks, desktops and servers. Windows 7* and 32-bit versions of the Intel® Power Gadget for Windows* has ceased development from 3.0.7. Starting with version 3.5 and going forward, only the 64-bit version and Windows 8* will be supported.

Background

Traditional methods to estimate power/energy usage of the processor has always been a cumbersome task that included special purpose tools or instrumentation on the platform along with third party equipment. The motivation for the tool was to assist end-users, ISV’s, OEM’s, developers, and others interested in a more precise estimation of power from a software level without any H/W instrumentation.

New Features

In version 3.0 there are additional features that include estimation of power on multi-socket systems as well as externally callable APIs to extract power information within sections of code. The multi-socket support essentially evaluates the Energy MSR on a per-socket basis and provides an estimate of power draw per socket. The API layer is a set of libraries and dlls that can be called and offers the flexibility to build the tool within code sections of an application. Latest release also includes support for Windows 10*.

Brief Description (Windows*)

Intel® Power Gadget 3.5 consists of the following components. Set of driver and libraries which access and post process the processor energy counter to calculate the power usage in Watts, temperate in Celsius and frequency in GHz (default install directory will be ~Program FilesIntelPower Gadget 3.5). A command line version of the tool (PowerLog3.0.exe) is also included

System Requirements (Windows*)

  • Windows 8*
  • Windows 10*
  • Windows Server 2008, Windows Server 2012
  • Microsoft .NET* Framework 4
  • Microsoft Visual C++ 2017 Redistributable package
  • 2nd Generation Intel® Core™ Processor or later, older processors not supported
    • Single socket
    • Multi-socket

System Requirements (macOS*)

  • macOS* 10.11 or later
  • 2nd Generation Intel® Core™ processor or later

Known Limitations / Issues

  • Graphs will not appear if your processor does not have the appropriate hardware counters
  • Discrete graphics cards are not supported and GPU graphs will not appear unless Intel graphics is in use
  • Windows 7* supported builds are below in the Archive section

Installation / Setup (Windows*)

  1. Run the msi package as an administrator. Accept the UAC, if one appears
  2. Follow the installer prompt instructions to complete installation
    1. .Net Framework 4 (will automatically be downloaded from Microsoft* site if not yet installed in your system) needs Internet connection
    2. Microsoft* Visual C++ 2017 Redistributable Package (will automatically get installed if not yet installed)

Installation / Setup (macOS*)

  1. Double click the downloaded DMG (Intel Power Gadget.dmg)
  2. Double click the package (Install Intel Power Gadget.pkg)
  3. Follow the installer prompt instructions to complete installation

On recent macOS versions, after installation users need to explicitly allow the Power Gadget driver to load:

  1. Open System Preferences, and click on 'Security and Privacy'
  2. Click the lock at the bottom of the page to unlock changes
  3. Click 'Allow' to allow system software from Intel Corporation:
  4. Restart your computer to apply the changes

On macOS Catalina (10.15), users may need to perform additional steps to enable the Power Gadget driver to automatically load (this is due to a bug in macOS).

  1. Open the Terminal application
  2. Enter the following command, and press Enter (requires a password to complete):
  1. Restart your computer to apply the changes

Usages (Windows*)

Common use of Intel® Power Gadget is to monitor energy usage of the processor

  • Provides processor power (Watts), temperature (Celsius) and frequency (MHz) in real-time via graph displayed in the GUI
  • Let you log the power and frequency measurements and save it in a csv format.
  • Double click on the desktop shortcut and the GUI will launch
  • Drag to move the GUI.
  • Right click the GUI and a pop-up menu will show up allowing you to choose options or close the application. Options have the following parameters. Click “Start Log” button in the GUI to start logging. Press the same button “Stop Log” to stop logging. While it’s logging, red label “REC” will blink in the power chart area.
  • You can choose to add time-stamp to the log file name or not.
  • You can choose the log file name.
  • You can choose to resize the GUI from 100% to 300% by dragging the slider and testing the new size with the “Apply Size” button and accept the changes by pressing “Ok”.
  • Screen Update Resolution lets you change how often the GUI is updated at runtime. This may range from 50 ms to 1000 ms. (Default set to 1000 ms)
  • Log Sampling Resolution lets you change the logging sampling resolution ranging from 1 ms to 1000 ms. (Default set to 100 ms)
  • In a multi-socket system, you can choose which package information to display in the GUI. The log will record all package information in a csv file.
  • Click 'Start Log' button in the GUI to start logging. Press the same button 'Stop Log' to stop logging. While it's logging, red label 'REC' will blink in the power chart area

Using Intel® Power Gadget 3.0 in a Script

In order to start and stop the logging in a script, first launch the GUI as usual.

  • At the beginning of the script, call 'IntelPowerGadget.exe -start' and it will trigger the logging in the GUI.
  • At the end of the script, call “IntelPowerGadget.exe -stop” and it will stop the logging.

The parameters for the log are based on the options set in the GUI.

PowerLog3.0

PowerLog3.0.exe is the command line version of Intel® Power Gadget in logging power usage

Usage:

  • Log power data to logfile for a period of time:
  • Start a command a log power data to logfile until the command finish:

Logfile Data

Google play music mac downloadkbclever. Logfile will include the elapsed timed, package power limit, processor frequency, GT frequency, processor temperature, average and cumulative power of the processor

  • Processor Energy (Total energy of the processor) = IA Energy + GT Energy (if applicable) + Others (not measured)
  • IA Energy (Energy of the CPU/processor cores)
  • GT Energy (Energy of the processor graphics) – If applicable , some processors for desktops and servers don’t have it or may have use discrete graphics

Only works on 2nd Generation Intel® Core™ processor family or newer. Atom processors not yet supported.

Use only 32-bit installer for 32-bit OS and 64-bit installer for 64-bit OS

Application may hang after running for a long period of time (just close and restart application)

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

This document contains information on products in the design phase of development.

All products, platforms, dates, and figures specified are preliminary based on current expectations, and are subject to change without notice. All dates specified are target dates, are provided for planning purposes only and are subject to change.

This document contains information on products in the design phase of development. Do not finalize a design with this information. Revised information will be published when the product is available. Verify with your local sales office that you have the latest datasheet before finalizing a design.

Code names featured are used internally within Intel to identify products that are in development and not yet publicly announced for release. Customers, licensees and other third parties are not authorized by Intel to use code names in advertising, promotion or marketing of any product or services and any such use of Intel's internal code names is at the sole risk of the user.

Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries.

*Other names and brands may be claimed as the property of others.

Unit 1: The Power Of Reproductionmr. Mac's Page Number

Copyright © 2019, Intel Corporation. All rights reserved.

Unit 1: The Power Of Reproductionmr. Mac's Page Book

Intel® Power Gadget also provides a C/C++ Application Programming Interface (API) for accessing this power and frequency data in your program; the API is supported on Windows and Mac OS X. For more information on the API's, see:

RECOMMENDED: Use Silverlight in the 32-bit Internet Explorer process on x64 systems. Most browser plug-ins (including Silverlight, Flash, Java and almost all ActiveX controls) only work in 32-bit browsers currently. Actualizar silverlight mac download. Silverlight is a powerful development tool for creating engaging, interactive user experiences for Web and mobile applications. Silverlight is a free plug-in, powered by the.NET framework and compatible with multiple browsers, devices and operating systems, bringing a new level of interactivity wherever the Web works. Microsoft Silverlight for Mac, free and safe download. Microsoft Silverlight latest version: Microsoft's answer to Adobe Air.

For Mac Using the Intel® Power Gadget API on Mac OS X

Unit 1: The Power Of Reproductionmr. Mac's Pageant

For Windows Using the Intel® Power Gadget API on Windows

End User License Agreement included in Windows* download

Notices

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR.

Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked 'reserved' or 'undefined.' Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information.

The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request.